It is intended for notebooks transportation with possibility of emergency information destruction at attempt of unauthorized access.

1. A principle of operation.
The complex is mounted in dust, moisture, hardened case in which notebook transportation is made. The protected information places on an additional hard disk which is located in a case separately from a notebook in special bay and is connected to it by an external interface cable. Emergency information destruction is made:

- automatically, at attempts of unauthorized case opening;
- automatically, at attempts of unauthorized bay opening where a guarded hard disk located;
- automatically, on the expiration of 24 offline work hours;
- distantly by the user's command.

Destruction process does not have an influence on working capacity of a notebook and is independent of a fact if there was an operation to the information during this moment whether or not. The variant of complex production for transportation of hard disks, diskettes, audio, video, streamer cartridges is possible.
The complex can be in two modes: waiting mode (РО) and a protection mode (Р1). In PO mode there is a testing of all main blocks and sensors. The easy approach to a notebook or magnetic media is carried out.
In P1 mode information destruction occurs automatically at attempt of unauthorized access or by the user at any moment by a radio channel (range up to 100 meters). Removal - setting in a protection mode is carried out by means of contactless electronic Proximity cards. The complex "Ten (SHADOW)" has the standalone power supply providing trouble-free work within 24 hours.

2. Additional possibilities.
a. Information destruction by the command of the user from any mobile phone by GSM channel;
b. the complete case protection eliminating an incorrect opening and drilling; c. complete operation recording in the real time, fixing in non-volatile memory the last 96 events with the detailed description.

3. The complex "TEN (SHADOW)" production.
Each complex production is made only on Requirement specification (RS) confirmed by the Customer and the manufacturer representative. In RS features of implementation and operation, finite cost and periods of execution of operations are showed. On the basis of the given document manufacture and delivery in maintenance of the equipment is made.

If you have any questions, our advisers will answer them most completely and at the earliest possible time.